GlassCell Isofab Inc.

A black, high solids, rubberized emulsion-type, general-purpose adhesive developing a tough, flexible bond. It is non-flammable during application, quick setting and waterproof.

Primary usage: For adhering blanket and rigid type thermal insulations to masonry, concrete, metal, wood and to themselves, where a strong, quick bond is required. Curtain wall insulation, insulated metal siding, panels and equipment using sound deadening felts are a few examples. Can also be used for adhering polyethylene film.

A black, rubberized emulsion based adhesive for bonding fibrous insulation materials to metal.

Primary usage: Used for bonding insulation materials such as low-density fibrous glass to metal in the fabrication of ductwork and equipment in heating and air-conditioning installations. Can also be used for sealing the edges of the insulation and for repairing damaged duct insulation coating.

A light colored, polymer emulsion based adhesive for bonding fibrous insulation materials to metal and facings.

Primary usage: Used for bonding insulation materials such as low-density fibrous glass to metal in the fabrication of ductwork and equipment in heating and air-conditioning installations. Can also be used for sealing the edges of the insulation and for repairing damaged duct insulation coating and for adhering vapor barrier jacketing and facing materials to insulation.

A quick setting, pressure sensitive, clear adhesive of thin brush consistency with good tack retention.

Primary usage: Used for sealing laps and tapes of vapor barrier jackets on thermal insulation. May be used with aluminum foil, kraft asphalt laminate and similar types of insulation coverings. Also used for bonding low-density fibrous glass insulation to metal in the fabrication of ductwork and equipment in heating and air conditioning installations.

A trowel consistency, synthetic rubber-based insulation adhesive. It is a solvent-type, smooth-spreading adhesive that can be applied at temperatures down to minus 12°C (10°F). It has high initial strength and sets rapidly to give a strong, resilient bond. Complies with CGSB 71-GP-24M, Type II.

Primary usage: For bonding polystyrene, polyurethane, cork, glass foam, fibrous glass to itself, concrete, masonry, wood or metal surfaces. It may also be used for bonding plywood or gypsum board to suitable insulation surfaces. Used in full coat applications to provide a vapor barrier.

230-38 is a quick setting, synthetic rubber adhesive, suitable for application by spray or brush. It is formulated with non-combustible solvents and is fire resistive when dry.

Primary usage: Used for bonding low-density fibrous glass insulation to metal in the fabrication of ductwork and equipment in heating and air-conditioning installations. Also used as a fire resistive primer for self-adhesive membranes during cold weather application.

830-05 is a fluid, rapid setting, synthetic rubber based adhesive, which dries to a very tacky film.

Primary usage: Used for bonding gypsum board or insulation such as polystyrene or fibrous glass to steel or wood . Can also be used for bonding certain sheet vapor barriers to roof decks, for bonding lightweight insulation materials to metal wall installations or ductwork and for laminating insulation to various construction materials.

An asphaltic emulsion mastic, heavily fibrated to produce a tough, flexible, long weathering coating. Resistant to physical abrasion and attack of industrial atmospheres.

Primary usage: Designed as a breather coating for heated equipment, it maintains stability at temperatures up to 95°C (203°F). A heavy-duty weather coating for thermal insulation on heated lines, vessels and equipment where a breathing mastic is required.

A solvent type asphalt mastic vapor barrier coating designed to provide superior vapor barrier and weathering characteristics. Adhesion and chemical resistance are excellent. Available in spray, trowel or airless spray grades.

Primary usage: Used as a heavy-duty coating over rigid thermal insulation on tanks, lines and equipment where operating temperatures are below ambient summer temperatures. May also be used with heated equipment where thermal insulation is dry during application and the coated face is not subjected to temperatures above 95°C (203°F). May be used as a bedding compound for cavity wall insulation where a vapor barrier is required.

A white, fire resistive resin emulsion insulation lagging coating, which dries to a tough, flexible, weather-resistant finish. Resistant to water, mild acids, alkalis, petroleum solvents and salt solutions. When combined with heavy glass cloth or canvas, excellent puncture resistance is achieved. May be factory or field tinted to meet special color requirements. Used as a finish or combined adhesive and finish for installing lagging materials such as glass cloth, canvas, muslin or scrim.

Primary usage: Used as a protective coating for thermal insulation on lines, ducts and equipment operating at above ambient temperatures. May be used on cold water or duo-temp insulation in low to normal humidity environments. Where high humidity may be expected, use 130-12.

A water-based, synthetic polymer, emulsion mastic insulation coating which provides a tough, durable, weather-resistant finish for thermal insulation. Freeze-thaw stable. Normally supplied as a white coating but may be produced in other colors on special order. Available in spray or trowel grades. For indoor or outdoor use.

Primary usage: Used as a decorative and protective coating for thermal insulation on lines, vessels and equipment where a vapor barrier coating is not desired. Provides good resistance to industrial and chemical atmospheres but may discolor under some environmental conditions.

A white, fire resistive resin emulsion lagging coating. The dried coating provides a neat, washable finish that is resistant to oil, water, mildew and fungus. Suitable for indoor use where a thick coating is not required.

Primary usage: Used for cementing laps on canvas, asbestos and glass lagging cloth, or as a sizing and finish when used in multiple coats with lagging fabrics.

A fire resistive resin emulsion insulation coating, which dries to a tough, flexible finish. Resistant to water, mild acids, alkalis, petroleum solvents and salt solutions. May be factory or field tinted to meet special color requirements. Complies with CGSB 1-GP-205M Type II.

Primary usage: Used as a sealer or encapsulant for asbestos insulation and other fibrous insulation materials. Provides a tough, elastomeric coating, which seals in loose fibers.

Foster® 30-07™ Adhesive Coating provides a protective finish for insulation on air conditioning ducts and cold water piping when applied in 2 coats with reinforcing fabric embedded between coats. When relative humidity exceeds 75% for continuous periods, or where the insulated piping or equipment contains chilled water, brine or refrigerant, additional vapor barrier protection is suggested.

Foster® 30-15™ Vapor-Fas™ Coating is a flexible, fire resistive vapor barrier finish for most types of rigid thermal insulation, except polystyrene. Formulated for indoor use, it is a solvent-based coating with a mild "paint type" odor, designed for use on pipes, vessels, ducts, and equipment operating below ambient temperatures.

Foster® 30-16™ Fire Resistive Anti-Abrasion Coating is a high solids, water-based fire resistive bore coating for the inner surfaces of cellular glass, rigid polyurethane, urea-formaldehyde, or polyisocyanurate foam insulation to reduce abrasion from vibration and temperature changes of piping or vessels. Its strong adhesive qualities through a wide temperature range permit its use on extremely low temperature and dual temperature equipment. It is light in color to facilitate application.

Foster® 30-35™ Tite-Fit™ Coating is a flexible, low odor, fire resistive, high solids, vapor barrier finish for most types of rigid thermal insulation, except polystyrene. Tite-Fit Coating is formulated for both indoor and outdoor use on commercial type applications. It is a solvent-based coating with a mild "paint type" odor, designed for use on pipes, vessels, ducts and equipment operating below ambient temperatures.

A fire resistive, polymeric resin emulsion asbestos removal agent and post removal sealer. As a post removal sealer, it is designed to mist, lock down and seal free asbestos fibers and residual asbestos containing material (ACM) after removal. It effectively locks the ACM onto cleaned exposed substrates and polyethylene sheeting within the containment area to prevent loose fibers from becoming airborne. The product also adheres to structural steel and surfaces to be re-insulated. Bakor 120-20 may also be used in a diluted form as an asbestos removal agent to mist and wet ACM for removal purposes in the containment area.

Primary usage: Used undiluted as a post removal sealer to lock down and seal ACM remaining in a containment area following removal operations and final visual inspection. It can also be used as a primer on structural surfaces to be fireproofed in respray applications and in a diluted form as a removal agent to mist and wet ACM for removal operations.

A high solids vinyl resin vapor barrier insulation coating of brush consistency. The dried film is fire resistive with low flame spread characteristics. Meets the requirements of Military Specification MIL-C-19993 (ships). Contains fungicide.

Primary usage: Specifically designed for indoor use over pre-finished thermal insulation in areas where low moisture permeability and chemical resistance is required. Used for vapor-proofing insulated valves, flanges and fittings on lines and equipment insulated with duo-temp or jacketed insulation.

A red, fast setting, flexible, synthetic rubber sealant with an oil resistant base. The dried film is fire resistant. Supplied in a heavy brush consistency.

Primary usage: Used where a fire resistive sealant is required to prevent pressure loss on joints and seams on metal ductwork of air distribution systems with pressures up to 300 mm (12"") water.

Bakor Duck-Seal is a polymeric emulsion based duct sealer supplied in a heavy brush consistency. Used to prevent pressure loss on joints and seams on metal duct work of air distribution systems with pressures up to 30 cm (12") of water.