GlassCell Isofab Inc.

Controlled high/low tack acrylic adhesive set on polyester film. Removes cleanly without residue. Resists U.V., moisture, solvents, mild acids, oil, and grease.

Primary Use: Where removability without damage is required, such as hanging poly barrier sheeting on asbestos removal projects. Removes cleanly from drywall.

A tightly woven cotton/polyester blend fabric coated on both sides with an extremely aggressive, premium grade rubber-based adhesive system. Flexibility and thickness enhance sealing ability to rough and textured surfaces. Twice the adhesive area per tape width.

Primary Use: Mounting poly sheet to materials such as brick and cinder block. Splicing sheet for pressurized environment.

A thick, strong polyethylene tape coated with an aggressive, premium quality, synthetic rubber based adhesive system.

Primary Use: A butt strip for polyethylene pipe insulation. Poly film splicing and sealing.

High visibility orange polyethylene tape specially formulated with acrylic adhesive designed to bond to polyethylene and polypropylene surfaces. Boldly printed with the marking "Danger-Asbestos." (also available without printing).

Primary Use: Created specifically to seal and mark bags used in asbestos removal programs

A 5 mil (125μ) thin, strong and conformable transparent polyethylene film tape with a very high shear, UV resistant cold weather acrylic adhesive with excellent holding properties and cold stick. Excellent resistance to moisture, acids, chemicals, alkalis, oils, abrasion, and weathering.

Primary Use: Weather seal for applying plastic storm windows, door jams, window casings in low temperature environment. Also used for film can sealing, ink container sealing and splicing polyethylene film.

A 5 mil (125μ) clear polyethylene film coated with a specially formulated, high tack, removable acrylic adhesive system. The adhesive will adhere to polyethylene and remove cleanly, in most instances, from drywall and painted surfaces. Reduces most costly repainting and repair of damage often incurred when using permanent adhesive tapes.

Primary Use: Hanging poly sheeting, especially during asbestos removal projects in finished areas.

Venture Tape 1520CW is a 2.0-mil annealed aluminum foil coated with Venture's CW™ cold weather acrylic pressure sensitive adhesive. The malleable foil applies easily to both fibrous and sheet metal ducts and conforms to irregular surfaces. Venture Tape 1520CW excels in demanding temperature and humidity applications and provides superior performance and durability over a wide range of environmental conditions.

Primary use: Sealing sheet metal and fiberglass ducts

Venture Tape 1521CW is a 1.4-mil annealed aluminum foil coated with Venture's CW™ cold weather acrylic pressure sensitive adhesive. The malleable foil applies easily to both fibrous and sheet metal acrylic pressure sensitive adhesive. ducts and conforms to irregular surfaces. Venture Tape 1521CW excels in demanding temperature and humidity applications and provides superior performance and durability over a wide range of environmental conditions.

Primary use: Economy grade 1.5 mil foil backing for sealing HVAC duct systems.

Tri-directionally reinforced with a 2x3/sq in. (2.5x2.5 cm) fiberglass scrim, U.L. listed Foil/Scrim/Kraft lamination. Coated with a special cold weather acrylic adhesive system which combines very high stick at normal temperatures with superior low temperature performance. Recommended for use down to 10°F(-12°C) as well as normal and very high temperatures. Conforms well to both fibrous ductboard and blankets. The ultimate in cold weather tapes. Meets ASTM C1136.

Primary Use: Vapor seal on FSK faced fiberglass ductboard and blanket systems.

High strength 2 mil (50μ) foil coated with an aggressive, high temperature acrylic adhesive system. Bonds well to both fibrous and metal ducts, providing an excellent vapor seal. Malleable foil conforms well on corners and to irregular surfaces. The special cold weather adhesive combines superior quick stick at normal temperatures with superior low temperature performance down to freezing. The ultimate for cold weather, excellent at normal and high temperatures, too.

Primary Use: Vapor sealing of fiberglass ductboard and sheet metal ducts. Also used on FSK systems.

Primary use: Heavy duty industrial HVAC applications

Excellent for general repair, bundling, patching and mending, conformable, excellent adhesion to variety of surfaces, no curl. Versatile polyethylene coated cloth tape. Conforms well to irregular surfaces. Tears straight, hangs straight, curl resistant.

Primary usage: Home and general repair. Bundling, patching and mending. Emergency tape for automotive breakdowns.

DATA SHEET: View

MSDS SHEET: View

A high strength premium quality polyethylene coated cotton cloth tape coated with an aggressive high tack natural rubber adhesive system. Adheres well to sheet metal ducts and conforms well to corners and irregular surfaces. Will not curl when unwound, tears readily.

Primary Use: Vapor sealing sheet metal ducts, general purpose, heavy duty service.

An economical, polyethylene coated cotton cloth duct tape with a natural rubber, pressure sensitive adhesive system. High tack, adheres well to metal surfaces, conforms well to corners and irregular surfaces.

Primary Use: Sealing sheet metal ducts and general purpose industrial applications.

A high quality metalized polyethylene cloth tape coated with a natural rubber pressure sensitive adhesive system. This tape has high tack, high peel and adheres well to fiber ductboard, flexible duct and sheet metal duct. Conforms well to corners and irregular surfaces.

Primary Use: Vapor sealing of fiber ductboard, flexible duct, sheet metal ductwork and general industrial purposes.

Thin, strong and conformable vinyl film tape coated with Venture's special rubber based adhesive designed to adhere well to PVC fitting.

Primary Use: Sealing longitudinal and circumferential joints in pipe coverings and vessels. Seals 45°, 90° joints, T's and valves in PVC materials.

A tough, conformable, specially formulated vinyl film tape coated with Venture's special rubber based adhesive which is designed to adhere well PVC fittings. This tape is particularly resistant to moisture, acids, alkalis, and oils, and is highly abrasion resistant as well.

Primary Use: Application of premolded high impact PVC insulation fitting covers.

A 1.5 mil (38μ), white aluminum foil coated with an aggressive cold weather acrylic adhesive system which offers superior quick stick at below zero and elevated temperatures. Zero temper, dead soft aluminum foil conforms well to smooth and embossed surfaces.

Primary Use: Matching lap joint and vapor seal for both smooth and satin foil faced board. Matches Thermax® and Atlas® products.

A high strength 1 mil (25μ) aluminum foil tape coated with Venture's C.W. cold weather acrylic adhesive. High quick stick at normal temperatures; excellent performance at low temperatures and high humidity.

Primary Use: Vapor sealing for fiberglass ductboard, sheet metal ducts and FSK systems.

An aluminum foil / Kraft tape laminate coated with Venture's C.W. cold weather acrylic adhesive. High quick stick at normal temperatures; excellent performance at low temperatures and high humidity.

Primary Use: Closure system for fiberglass and foil faced mineral wool insulation systems.

A high strength 1.2 mil (30μ) aluminum foil tape coated with Venture's C.W. cold weather acrylic adhesive system. This adhesive combines high quick stick at normal temperatures with excellent performance at low temperatures and high humidity.

Primary Use: Vapor sealing tape for fiberglass ductboard, sheet metal ducts and FSK systems.

High strength, 3 mil (75μ) aluminum foil coated with 2 mils (50μ) of an aggressive, high temperature acrylic adhesive system. Conforms well to corners and irregular surfaces. Superior adhesion to both fibrous and metal ducts, providing an excellent vapor seal. Meets Mil-T-23397B.

Primary Use: Moisture and vapor barrier for duct systems. For roofing applications, flashing, joints and insulation. Used as a protective layer during welding.

A 2 mil (50μ) high strength aluminum foil coated with special cold weather acrylic adhesive system that combines superior quick stick at normal temperatures with superior low temperature performance at freezing (32°F or 0°C). The ultimate in cold weather tapes. Recommended for use at normal and high temperatures also.

Primary Use: Improved vapor sealing of fiberglass ductboard, ductwrap and FSK system.

A special 1.5 mil (38μ) high strength aluminum foil tape with a higher tack, special C.W. cold weather acrylic adhesive. This formulation combines extremely high quick stick at normal temperatures with superior performance at low temperatures and high humidity.

Primary Use: Thinner material allows for superior conformability vapor sealing of fiberglass ductboard and FSK systems.

Tri-directionally reinforced with a 2x3/sq in. (2.5x2.5 cm) fiberglass scrim, U.L. listed Foil/Scrim/Kraft lamination. Coated with a special cold weather acrylic adhesive system which combines very high stick at normal temperatures with superior low temperature performance. Recommended for use down to 10°F(-12°C) as well as normal and very high temperatures. Conforms well to both fibrous ductboard and blankets. The ultimate in cold weather tapes. Meets ASTM C1136.

Primary Use: Vapor seal on FSK faced fiberglass ductboard and blanket systems.

Kiss-cut squares, 3 x 3/sq. in. (2.5cm x 2.5 cm), on release liner. 30% more contact area than disks. Same U.L. listed material as No. 1525, with diagonally reinforced Foil/Scrim/Kraft lamination to match perfectly. 500 per unit. Cold weather adhesive formula.

Primary Use: Provides vapor seal over washers and pins used in mounting insulation; seals small punctures and tears. Neater, saves labor of hand cutting.

A tri-directionally reinforced, hand tearable, expanded polyethylene foil tape coated with acrylic adhesive which exhibits superior quick stick at high and low temperatures. Resistant to moisture, it is recommended for use in conditions of high humidity.

Primary Use: Vapor seal on reinforced aluminum faced fiberglass or mineral wool thermal insulation.

All Service Jacket Tape. White Kraft/Scrim/Foil lamination with 4 x 4/sq.in. (2.5 x 2.5 cm) tri-directional scrim reinforcement. Special cold weather acrylic adhesive system that combines superior quick stick at normal temperatures with superior low temperature performance down to -25°F (-32°C). Excellent at normal and high temperatures also.

Primary Use: Closure system and vapor seal on All Service Jacket faced duct and piping systems.

Applicable to foam glass, mineral fiber insulation, nitrile rubber foam, and semi-rigid and rigid foam insulation. Specify for replacement of fab and mastics, butyl duct wrap, and other interior and exterior jacketing materials. Available in aluminum or white.

White metalized polypropylene/scrim/kraft laminated facing tape. 4 x 4/sq. in (2.5 x 2.5 cm) Tri-directional scrim reinforcement. C.W. acrylic adhesive.

Primary Use: Closure system and vapor seal on Lamtec WMP®-10 faced thermal insulation. Colors: White and Black.

A scrim reinforced white aluminum foil/kraft lamination coated with a special pressure sensitive, acrylic, cold weather adhesive that combines superior quick stick at normal temperatures with superior low temperature performance. This tape has superior resistance to moisture and is recommended for use in high humidity conditions.

Primary use: as a vapor seal for reinforced aluminum faced fiberglass or mineral wool thermal insulation. Matches Lamtec WCF-30 and WCF-50 facings.

A bidirectionally reinforced white vinyl/scrim/metalized PET lamination. This tape conforms well to irregular surfaces. Coated with Venture's "CW" plus adhesive system, which combines superior quick stick at normal temperatures with superior low temperature performance down to -25°F.

Primary Use: Used as a vapor barrier for Lamtec WRP-HD for metal building insulation.

A triple ply laminate of white polypropylene film with a metalized polyester film backing, and fiberglass scrim reinforcement.

Primary Use: Closure system and vapor seal on Lamtec WMP®-VR-R metal building facings.

Heavy duty aluminum foil/scrim/kraft lamination constructed with fiberglass and polyester yarn reinforcement. Special vapor barrier coating maintains 0.02 perm WVTR. Highly abuse resistant. Flame resistant adhesive bond. C.W. cold weather acrylic adhesive system allows application at 10°F (-12°C).

Primary Use: Closure system and vapor seal on FSK faced fiberglass and blanket systems.

A 2.0 mil (50 μ) white aluminum foil coated with an aggressive cold weather acrylic adhesive system which offers superior quick stick at below zero and elevated temperatures. Zero temper, dead soft aluminum foil conforms well to smooth surfaces.

Primary Use: Matching lap joint and vapor seal for both smooth and satin foil faced board. Matches Thermax® and Atlas® products.

Aluminum foil reinforced with a fiberglass/polyester blend fabric coated with Venture's C.W. cold weather acrylic adhesive system. Specifically designed as a patch tape for high impact applications, i.e. hockey arenas, gymnasiums, tennis counts, etc. Excellent strength and tear resistance.

Primary Use: Seaming vinyl faced Fiberglas insulation in metal buildings and for water heater blanket installation.

Metalized white polypropylene reinforced with a fiberglass/polyester blend fabric coated with Venture's C.W. cold weather acrylic adhesive system. Specifically designed as a patch tape for high impact applications, I.e. hockey arenas, gymnasiums, tennis counts, etc. Excellent strength and tear resistance.

Primary Use: Matches Lamtec® Gymguard for wall and ceiling applications offering a smooth, bright white finish and a continuous vapor barrier.

Thin, strong, conformable, premium vinyl tape. Particularly aggressive acrylic adhesive system bonded securely to its backing. Shrink and plasticizer resistant.

Primary Use: Seaming vinyl faced fiberglass insulation in metal buildings and for water heater blanket installation.