Thermal Insulation: Neoprene (Synthetic Rubber)
The original flexible elastomeric insulation for mechanical and air handling systems. The expanded closed cell structure of Armaflex makes it an efficient insulator and offers maximum resistance to mold and mildew. It is manufactured without the use of CFC's, HFC's or HCFC's.
AP Armaflex SS Self-Seal Pipe Insulation is a 25/50-rated flexible elastomeric thermal insulation, supplied in:
DATA SHEET: View MSDS SHEET: View |
  |
Mold resistant AP Armaflex Pipe (Tube) Insulation is a flexible elastomeric thermal insulation, black in color, supplied as unslit tubing, or slit by GCI in:
DATA SHEET: View MSDS SHEET: View |
 |
Elastomeric thermal insulation, black in color. It is furnished with a smooth skin on one side which forms the outer exposed insulation surface. The expanded closed-cell structure of Armaflex makes it an efficient insulation. It is manufactured without the use of CFC's, HCFC's, or HFC's. It is also formaldehyde-free, low VOCs, dust free, fiber free and resists mold and mildew. DATA SHEET: View MSDS SHEET: View |
 |
Mold resistant AP/Armaflex SA Self-Adhering Sheet and Roll Insulation is a flexible, elastomeric thermal insulation, black in color. Sheets are supplied as flat sheets 36" x 48" (.915m x 1.22m) in thicknesses of 1/4", 3/8", 1/2", 3/4", 1", 1-1/2" and 2"(6, 10, 13, 19, 25, 38 and 50mm). Rolls are supplied in 48" (1.22m) wide continuous rolls in thicknesses of 3/8", 1/2", 3/4", 1", 1-1/2" and 2" (10, 13, 19, 25, 38 and 50mm). It is also available in 60" (1.53m) in 1" thickness. DATA SHEET: View MSDS SHEET: View |
|
AP Armaflex SA Black Duct Liner/Wrap: The patented elastomeric duct liner and wrap with advanced, superior-grip Pressure Sensitive Adhesive system for non-pinned field applications. The original IAQ Insulation for air handling systems. AP Armaflex Gray Duct Liner/Wrap: The Armaflex duct liner and wrap for pinned, fabricated factory applied duct insulation in accordance with SMACNA requirements. DATA SHEET: View MSDS SHEET: none |
 |
Armafix Insulation Pipe Hangers (IPH) and Nonhalogen Insulation Pipe Hangers (NPH) are quick, innovative alternatives to traditional block and dowel pipe supports. The engineered, foam-to-foam solutions provide optimum load bearing while protecting against thickness compression and condensation gaps that can compromise system integrity. DATA SHEET: View MSDS SHEET: View |
 |
Armaflex(r) 520 Adhesive is an air-drying contact adhesive that is excellent for joining seams and butt joints of Armaflex Pipe and Sheet Insulations for line temperatures up to 250°F (120°C). The adhesive may also be used to apply Armaflex Sheet Insulation to flat or curved metal surfaces that will operate at temperatures up to 180°F (82°C). DATA SHEET: View MSDS SHEET: View |
 |
Armaflex(r) 520 BLV Adhesive is a black, low VOC air-drying contact adhesive that is excellent for joining seams and butt joints of Armaflex Pipe and Sheet Insulations for line temperatures up to 250°F (120°C). No additional tape wrap needed to prevent gapping and moisture infiltration. The adhesive may also be used to apply Armaflex Sheet Insulation to flat or curved metal surfaces that will operate at temperatures up to 180°F (82°C). DATA SHEET: View MSDS SHEET: View |
 |
Armaflex(r) Low VOC Spray Adhesive is supplied in 27 pound aerosolized canisters. The product contains no chlorinated solvents such as methylene chloride and does not contain ozone depleting compounds. The adhesive complies with SCAQMD rule 1168 for volatile organic compound content less than 80 g/l. Dried film meets the fire building codes of flame spread index of less than 25 and smoke developed index of less than 50 when tested according to ASTM E 84. DATA SHEET: View MSDS SHEET: View |
 |
AP/Armaflex Insulation Tape is made of high-quality AP/Armaflex Insulation, an elastomeric thermal insulation material. The self-adhering tape is supplied in convenient strip form, 2" (50mm) wide, 30' (9.1m) long and 1/8" (3mm) thick. No bands, wires, or additional adhesive needed. Available in standard cartons and tape dispensers. DATA SHEET: View MSDS SHEET: none |
 |
WB/Armaflex Finish is a water-based latex enamel supplied in gallon containers or quart containers for use over all forms of Armaflex Insulations. It provides a protective semi-gloss finish suitable to both indoor and outdoor applications. WB/Armaflex Finish brushes or rolls on easily. Its water-base formulation makes it fast-drying without solvent fumes. Clean up with soap and warm water. DATA SHEET: View MSDS SHEET: View |
 |