GlassCell Isofab Inc.

Thermal Insulation: Polyethylene (Polyolefin)


Therma-cel® Insulation is a flexible, polyolefin, thermal insulation. It is used to retard heat gain and prevent condensation or frost formation on cold water plumbing, chilled water and air-conditioning lines. Therma-cel® has a low thermal conductivity and very low water vapor transmission rate. This low density product demonstrates excellent thermal, physical and chemical resistant properties and has a broad service temperature range between -160°F and 200°F (-105°C and 92°C). It can be installed in commercial, industrial and residential insulation projects. Acceptable for use with heat tracing/heat tape.


SS PIPE INSULATION

Therma-cel™ Seam-Seal is a self-sealing, flexible, polyolefin, thermal insulation. It is black in color, marked in yellow ink and available in wall thicknesses of 3/8", 1/2", 3/4" and 1", in sizes ranging from 3/8" to 4" IPS. Therma-cel™ Seam-Seal is used to retard heat gain and prevent condensation or frost formation on cold water plumbing, chilled water and air conditioning lines. therma-cel™ Seam-Seal also retards heat loss on hot water plumbing.

DATA SHEET: View

MSDS SHEET: View None


armacell

SHEETS AND ROLLS

Therma-cel™ Sheet Insulation is a flexible, polyolefin, thermal insulation. It is black in color and available in sheet and roll form. Standard sheet size is 36" x 48" in thicknesses of 3/8" thru 2 1/2". Standard roll width is 48" available in the same thickness. Therma-cel™ Sheet Insulation is used to retard heat flow and provide condensation control on large diameter piping, tanks, vessels and equipment.

DATA SHEET: View

MSDS SHEET: View


armacell

ACCESSORIES

CORK INSULATION TAPE

This product was formulated to provide insulation and to prevent condensation on pipes, fittings and tubing used in heating, air conditioning, refrigeration and plumbing. It can also be used on hot pipes.

DATA SHEET: View

MSDS SHEET: View


armacell

ELASTOMERIC FOAM TAPE

Elastomeric Foam Tape is a convenient and easy-to-use product which complements the Nomaco K-Flex family of tubing and sheet insulation products. It is a specially designed flexible, elastomeric insulation product.

DATA SHEET: View need

MSDS SHEET: View


armacell

K-Flex 360 PIPE INSULATION SUPPORTS

K-Flex 360 Insulated Pipe Supports are specifically designed to ensure that the thickness of the insulation is not reduced by the weight of the pipe. The hinged, 360° position-free, rigid polyurethane core has a high compressive load. It is joined by two elastomeric insulation collars which provide the ideal surface to adhere elastomeric tubular insulation using contact adhesive.

DATA SHEET: View

MSDS SHEET: View


armacell

K-FLEX 720 LVOC CONTACT ADHESIVE

K-Flex 720-LVOC Contact Adhesive is an air-drying solvent-based synthetic elastomer contact adhesive that is excellent for joining seams and butt joints of elastomeric & polyolefin pipe and Sheet Insulation. It is amber in color for excellent aesthetics. K-Flex 720-LVOC Contact Adhesive forms a tough, flexible moisture – and heat resistant bond when used with elastomeric products.

DATA SHEET: View

MSDS SHEET: View


armacell

R-320 CONTACT ADHESIVE

R-320 & R-620 Contact Adhesives are airdrying solvent based neoprene contact adhesives that are excellent for joining seams and butt joints of elastomeric & polyolefin pipe and sheet Insulation. R-320 & R 620 Contact Adhesives make resilient moisture and heat-resistant bonds when used with elastomeric and polyolefin products.

DATA SHEET: View

MSDS SHEET: View


armacell

R-373 CONTACT ADHESIVE

R-373 Contact Adhesive is an air-drying solvent based neoprene contact adhesive (blue in color for easy identification) that is excellent for joining seams and butt joints of elastomeric pipe and sheet insulation. R-373 Contact Adhesive will make a resilient moisture and heat-resistant bond when used with elastomeric products.

DATA SHEET: View

MSDS SHEET: View


armacell

R-374 PROTECTIVE COATING

R-374 Protective Coating is a water-based acrylic resin coating which has been specially formulated for application to elastomeric insulation surfaces. This white coating provides a fast-drying, high gloss protective finish for both indoor and outdoor installations. R-374 Protective Coating is a flexible coating which offers excellent resistance to the harmful effects from the ultraviolet rays of the sun.

DATA SHEET: View

MSDS SHEET: View


armacell